© 2019 D3Consultants. All Rights Reserved.
Used for drying asphalt, soil, rock, concrete, aggregate or similar materials.
For performing laboratory evaluation of the CBR value of highway sub bases and sub grade and for the determination of strength of cohesive materials.
The test covers the determination of consolidated drained shear strength of a soil or sand material in direct shear.
Used for checking of Aggregate Crushing Value
The liquid limit of a soil is the moisture content, expressed as a percentage of the weight of the oven-dried soil, at the boundary between the liquid and plastic states of consistency.
The cone penetration or cone penetrometer test (CPT) is a method used to determine the geotechnical engineering properties of soils and delineating soil stratigraphy
A penetration device used in the testing of hydraulic cements and similar materials to measure their consistency and their initial and final setting times.
The test is designed to accelerate the expansion in cement paste by application of heat. durability of the structure in which cement is used.
Used for the preparation and compaction of 70.7 mm mortar cube specimens.
For volume Calculation.
A device for determining the normal consistency and time of setting of portland cements .
To measure Shape and size of Coarse Aggregate
For Checking of Specific gravity of Soil.
Used for making sample mould of soil for compaction.
For Grading of Fine Aggregate.
For Grading of Coarse Aggregate.
Used for Volume Calculation.
To measure the moisture content of samples.
For checking of Field Dry Density.
To mix Cement and Aggregate, Sand.
Slump test of Concrete.
Casting of Cement Concrete.
Casting of Cement Concrete.
The non-destructive tests are the group of useful methods to evaluate the strength of construction materials without causing damage.
For checking of Compressive strength.
Weighing of Test Material.
Weighing of Test Material.
Automatic Grading Test Machine.
Measurement equipment at a least count of 0.01 mm
Checking of density of coarse aggregate.
Abrasion Test is the measure of aggregate toughness and abrasion resistance such as crushing, degradation and disintegration.
The Aggregate Impact Value Testing Apparatus, meets with BS 812, determine the Aggregate Impact Value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact.
To Make Cubes for testing
For Collection of Sample